0
What else can I help you with?
Were is the crankshaft sensor on a 1996 olds LSS?
Does the LSS have a 3.8L engine? If so, the crank sensor is behind the crank pulley/harmonic damper.
Is crank pulley same as harmonic balancer repair?
In most cases the crank pulley bolts to the balancer so the crank pulley would not be the same as the harmonic balancer.
Where is the Crank Sensor in a 2001 Malibu?
The crank sensor on a 2001 Malibu is located on the bottom of the engine near the crank shaft. It monitors the rotation and speed of the crank shaft.
Does a 1993 Ford Aerostar Van have a crank position sensor?
It appears that the Ford Aerostar with 3.0 engine does not have a crank position sensor, but the 4.0 engine does have one.
What is the sensor located on the rear of your Ford Rangers 3.0L Duratec engine?
crank sensor
Where is the crank sensor on 1991 olds cutlass ciera?
the crank sensor is behind the harmonic balancer
Why does your 91 Buick century idols high after replacing harmonic balancer?
sounds like you broke the crank sensor that is mounted right behind the balancer.
Crank sensor location on a 1989 Oldsmobile delta 98?
The crank sensor is located behind the Harmonic balancer. Try not to break the rubber within the Harmonic balancer when removing or on the safe side replace both the Crank sensor and the Harmonic balancer ( the big pulley on the bottom - most part of the engine.)
What is the name of the sensor located by or behind the harmonic balancer?
crank shaft sensor With the limited information you have provided, I would have to say, that you have found the "Crank" sensor.
Where is the crank shaft sensor loacted on the engine for 1996 F-250 7.3 diesel?
The crank shaft sensor is located on front of block above the harmonic balance wheel (bottom pulley on front of engine). This is easiest to get at from underneath the vehicle.
Where is the crank sensor located on 96 olds aurora?
by the harmonic balancer
Where is the crank sensor on a 95 Chevy Lumina?
Behind the harmonic balancer.
Do you need to replace cam sensor after replacing the crank sensor?
if you have a code w/ cam to crank reference then yes. if only a crank sensor issue the no
Were is the crankshaft sensor on a 1996 olds LSS?
Does the LSS have a 3.8L engine? If so, the crank sensor is behind the crank pulley/harmonic damper.
Where is the crank position sensor located on a 3100 motor?
behind the harmonic balancer.
Where is the crank positioning sensor on a F350?
the cam positioning sensor is located on the front of the engine block, above the harmonic balance pulley. easiest to get at this from underneath the vehicle,and to change the snsor, nothing else needs to be removed to get at it.
Where is the crank sensor on a 3.4L 1992 cutlass supreme not the 3.1L?
It is behind the harmonic balancer.
